FIXED FRAME · SPECIAL SHAPES WITH MOSQUIFIX
HAWAII and MOSQUIFIX fixed insect screens
An aluminium frame that protects windows without operating the mesh every day.
HAWAII has a rounded profile. MOSQUIFIX has a flat profile. Special shapes are always made with the MOSQUIFIX profile.

THE SYSTEM IN DETAIL
Technical data.
- HAWAII
- Rounded profile; visible face without brushes or seals
- MOSQUIFIX
- Flat profile; overall section 10,7 × 27,6 mm
- Recess fixing
- Stainless steel clips
- Face fixing
- Half butterfly clips
| Model | Maximum width (mm) | Maximum height (mm) |
|---|---|---|
| Fixed Insect Screen HAWAII | 1 400 | 2 000 |
| Fixed Insect Screen MOSQUIFIX | 1 400 | 2 000 |
Conditions and options
- A crossbar is required if width or height exceeds 1 400 mm. HAWAII: clip-in crossbar without drilling. MOSQUIFIX: the frame profile also forms the crossbar.
- HAWAII: 90° cuts, slot-together assembly and an integrated mesh cutting guide to avoid damaging the profile.
- Optional black or TRANSPARENCE+ mesh.
MOSQUIFIX · Special shapes
Special shapes are always made with the MOSQUIFIX profile.
- MOSQUIFIX allows round, arched or polygonal shapes: triangles, trapezoids and other shapes on request.
- For shaped screens, provide overall width and height and a dimensioned sketch. For arches, specify H1 from the base to the start of the arch; for circles, the diameter. For polygons, provide the necessary side lengths, heights and angles.
- Crossbar position depends on the shape. Specify the supporting surface and installation face.
Dimensions and conditions apply to the configurations shown.
EACH CONFIGURATION
Technical sheets, sections
and details.
Consult all system presentations, dimensions, options and diagrams.
Fixed Insect Screen HAWAII Fixed Insect Screen MOSQUIFIX Fixed Insect Screen MOSQUIFIX · Special shapes Fixed Insect Screen MOSQUIFIX · Defining and measuring the shape
HAWAII and MOSQUIFIX fixed insect screens · The range
Enlarge the sheet and diagrams ↗

Read the full technical sheet text
THE RANGE / FIXED SCREENS
Fixed screens
Let air in. Keep life simple.
An aluminium frame protects the window without daily operation of the mesh. Discreet protection for a more
comfortable room.
PROTECTION INTEGRATED WITH THE WINDOW
01
Two profile designs.
HAWAII is rounded; MOSQUIFIX is
flat and available in special shapes.
02
Mesh that stays in place.
The fixed frame keeps the opening
protected.
03
Two ways to install.
Stainless steel clips for reveal fixing
or half-butterfly turn buttons for face
fixing.
HAWAII
p. 36
MOSQUIFIX
p. 37
Special shapes
p. 38
Installed view: HAWAII. Optional black mesh or TRANSPARENCE+.HAWAII and MOSQUIFIX fixed insect screens · Technical data
Enlarge the sheet and diagrams ↗

Read the full technical sheet text
FIXED SCREENS / TECHNICAL INFORMATION
The frame and its installation.
Two profiles, two fixing options.
HAWAII and MOSQUIFIX share the same maximum dimensions and fixing methods. Their profiles and
crossbars differ.
HAWAII
Rounded profile. No brushes or
seals on the visible face.
MOSQUIFIX
Flat profile. Rectangles and
special shapes.
MODEL MAXIMUM WIDTH MAXIMUM HEIGHT
HAWAII 1 400 mm 2 000 mm
MOSQUIFIX 1 400 mm 2 000 mm
Stainless steel clips
Reveal fixing for HAWAII and MOSQUIFIX.
Half-butterfly turn button
Face fixing to the wall. Choose to suit the fixing surface and access to the
window.
Crossbar required if width or height > 1 400 mm.
HAWAII: clip-on crossbar. MOSQUIFIX: frame profile used as the crossbar.
Optional black mesh or TRANSPARENCE+. MOSQUIFIX shapes: p. 38.Fixed Insect Screen HAWAII
Enquire about this configuration Enlarge the sheet and diagrams ↗
Installation instructions

Read the full technical sheet text
FIXED SCREENS / THE PRODUCT
HAWAII · Fixed screen
Window protection made simple.
A fixed frame with a rounded profile, for windows and openings where passage through the screen is not
required.
CLIP-ON CROSSBAR STAINLESS STEEL CLIP
A clean visible face.
No visible brushes or seals. The rounded shape
complements the window lines.
Precise assembly.
90° cuts, push-fit assembly and an integrated
guide for trimming the mesh without damaging
the profile.
Clip-on crossbar, with no drilling of the profile.
1 400 mm
MAXIMUM WIDTH
2 000 mm
MAXIMUM HEIGHT
1 400 mm
CROSSBAR THRESHOLD
A crossbar is required if the width or height exceeds 1 400 mm.
TWO FIXING METHODS
Stainless steel clips: reveal fixing.
Half-butterfly turn buttons: face fixing.
MESH OPTIONS
Black mesh or TRANSPARENCE+ high-visibility mesh.Fixed Insect Screen MOSQUIFIX
Enquire about this configuration Enlarge the sheet and diagrams ↗

Read the full technical sheet text
FIXED SCREENS / THE PRODUCT
MOSQUIFIX · Fixed screen
The simplicity of a flat profile.
A fixed frame to protect the window. The flat profile forms both the frame and the crossbar; it also allows
special shapes.
INSTALLED VIEW
One profile for frame and crossbar.
Overall section: 10.7 × 27.6 mm. Special shapes
are shown on pages 38 and 39.
Two installation methods.
Stainless steel clips for reveal fixing or
half-butterfly turn buttons for face fixing.
The crossbar is made from the MOSQUIFIX profile itself.
1 400 mm
MAXIMUM WIDTH
2 000 mm
MAXIMUM HEIGHT
1 400 mm
CROSSBAR THRESHOLD
A crossbar is required if the width or height exceeds 1 400 mm.
SHAPES ON REQUEST
Round, arched or polygonal.
Drawing and dimensions: p. 39.
MESH OPTIONS
Black mesh or TRANSPARENCE+ high-visibility mesh.Fixed Insect Screen MOSQUIFIX · Special shapes
Enquire about this configuration Enlarge the sheet and diagrams ↗

Read the full technical sheet text
FIXED SCREENS / MOSQUIFIX
MOSQUIFIX · Special shapes
Protection that follows the opening.
Round, arched or polygonal windows: triangles, trapezoids and other shapes on request. The frame follows
the geometry of the opening.
Round Segmental arch Semicircular arch
Optional black mesh or TRANSPARENCE+ high-visibility mesh.
Defining the geometry.
Measure the overall width and height. Provide a
dimensioned drawing showing the sides, straight
sections and curves. For an arch: overall height and
height to the springing point.
Fixings and crossbar.
Stainless steel clips for reveal fixing or half-butterfly
turn buttons for face fixing. Crossbar if width or
height > 1 400 mm; its position depends on the
shape.
1 400 mm
MAXIMUM WIDTH
2 000 mm
MAXIMUM HEIGHT
39
PAGE / DETAILED MEASUREMENTSFixed Insect Screen MOSQUIFIX · Defining and measuring the shape
Enquire about this configuration Enlarge the sheet and diagrams ↗

Read the full technical sheet text
FIXED SCREENS / DEFINING THE SHAPE
MOSQUIFIX · Defining the shape
From measurements to frame.
Include a dimensioned drawing to define the geometry, fixing method and crossbar. The diagrams below are
not to scale.
H
H1
W
Segmental arch
H
H1
W
Semicircular arch
W: overall width. H: overall height.
H1: height from the bottom of the frame to the springing point of the arch.
Polygonal shapes
Triangles Trapezoids Other polygons
Specify the sides, heights and relevant angles. For a round shape: the diameter. State the fixing surface and side;
stainless steel clips for reveal fixing or half-butterfly turn buttons for face fixing.
Up to 1 400 × 2 000 mm. A crossbar made from MOSQUIFIX profile is required if width or height > 1 400 mm.
Position to suit the shape. Optional black mesh or TRANSPARENCE+.
Contact