FLAT MESH · LATERAL ROLLING
TECH’N’ROLL lateral roller insect screen
Flat roller mesh with a chain. Integrated grip accessible from both sides.
Lateral with 1 leaf or 2 leaves meeting at the centre.

THE SYSTEM IN DETAIL
Technical data.
- Mesh / fabric
- Flat roller mesh, chain guided
- Bottom guide · height
- 6,5 mm
- Top guide · height
- 60 mm
- Handle profile · width
- 50 mm
- Wall profiles
- Project approximately 60 mm
| Configuration | Maximum width (mm) | Minimum height (mm) | Maximum height (mm) |
|---|---|---|---|
| TECH’N’ROLL Lateral 1 Leaf | 1 400 | 1 400 | 2 700 |
| TECH’N’ROLL Lateral 2 Leaves | 2 800 overall | 1 400 | 2 700 |
Conditions and options
- Each leaf must be at least 150 mm taller than it is wide. For two leaves, the rule applies to each leaf. The absolute minimum height of 1 400 mm also applies.
- For two leaves, maximum width is 1 400 mm per leaf and 2 800 mm overall.
- The spring supports progressive, controlled operation. Integrated grip accessible from inside and outside.
- Flexible tabs in the bottom chain engage the mesh and help retain it in wind without damaging it.
- Mechanism views with a transparent top guide are explanatory: the installed product’s guide is opaque.
Dimensions and conditions apply to the configurations shown.
EACH CONFIGURATION
Technical sheets, sections
and details.
Consult all system presentations, dimensions, options and diagrams.
TECH’N’ROLL lateral roller insect screen · The range
Enlarge the sheet and diagrams ↗

Read the full technical sheet text
THE RANGE / TECH’N’ROLL
TECH’N’ROLL
Flat mesh, a clear passage.
A chain-guided side-opening roller insect screen for doors, windows and frequently used passageways. An
integrated grip accessible from both sides.
FLAT MESH / ONE OR TWO LEAVES
01
Controlled movement.
The spring assists smooth,
controlled operation.
02
An easy passage.
The 6.5 mm bottom track keeps the
floor profile low.
03
Inside and outside.
The pull profile can be gripped from
inside and outside.
Side-opening · 1 leaf
p. 24
Side-opening · 2 leaves
p. 25
Up to 1 400 mm per leaf.TECH’N’ROLL lateral roller insect screen · Technical data
Enlarge the sheet and diagrams ↗

Read the full technical sheet text
TECH’N’ROLL / THE SYSTEM
TECH’N’ROLL · Technical information
A mechanism that follows your movement.
Two side-opening configurations. The bottom chain guides the mesh; its flexible tabs help retain it in windy
conditions.
1 leaf
Extends from one side.
2 leaves
Central closure.
CONFIGURATION MAXIMUM WIDTH MIN. / MAX. HEIGHT
1 leaf 1 400 mm 1 400 / 2 700 mm
2 leaves 2 800 mm overall 1 400 / 2 700 mm
Height: at least the width of each leaf + 150 mm.
This rule applies to each of the two leaves.
6.5 mm
BOTTOM TRACK / H.
60 mm
TOP GUIDE / H.
50 mm
PULL PROFILE / W.
Wall profiles project approximately 60 mm from the wall.
The chain retains the mesh.
The flexible red tabs engage with the mesh and hold it in the bottom
chain. They are designed to reduce the risk of the mesh coming
loose in the wind without damaging it.TECH’N’ROLL Lateral 1 Leaf
Enquire about this configuration Enlarge the sheet and diagrams ↗
Installation instructions
TECH’N’ROLL Lateral 1 Leaf · Installation
TECH’N’ROLL Lateral 1 Leaf · Detailed installation

Read the full technical sheet text
TECH’N’ROLL / THE PRODUCT
TECH’N’ROLL · Side-opening 1 leaf
One movement, inside or out.
A chain-guided side-opening roller insect screen for doors and windows. The grip is integrated, with no
separate handle.
INSTALLED VIEW
Controlled operation.
The spring assists movement. The profile can be
operated from inside or outside.
A discreet threshold.
6.5 mm floor guide. Flexible tabs in the
articulated chain retain the mesh.
Mechanism view: top guide shown transparent; opaque on the installed product.
1 400 mm
MAXIMUM WIDTH
1 400 mm
MINIMUM HEIGHT
2 700 mm
MAXIMUM HEIGHT
6.5 mm
BOTTOM TRACK
Height: at least the width of each leaf + 150 mm.
CONFIGURATION
One leaf up to 1 400 mm wide.
MECHANISM
Controlled operation. Grip on both sides.
Top guide: 60 mm high.TECH’N’ROLL Lateral 2 Leaves
Enquire about this configuration Enlarge the sheet and diagrams ↗
Installation instructions
TECH’N’ROLL Lateral 2 Leaves · Installation
TECH’N’ROLL Lateral 2 Leaves · Detailed installation

Read the full technical sheet text
TECH’N’ROLL / THE PRODUCT
TECH’N’ROLL · Side-opening 2 leaves
Two leaves, a generous opening.
Two roller screens meet in the centre, leaf to leaf. Flat mesh, an integrated grip and a low bottom guide.
INSTALLED VIEW
Central closure.
The pull profiles meet in the centre. Each profile
is 50 mm wide and can be gripped from both
sides.
A discreet threshold.
6.5 mm floor guide. Flexible tabs in the
articulated chain retain the mesh.
Mechanism view: top guide shown transparent; opaque on the installed product.
2 800 mm
MAX. OVERALL WIDTH
1 400 mm
MINIMUM HEIGHT
2 700 mm
MAXIMUM HEIGHT
6.5 mm
BOTTOM TRACK
Height: at least the width of each leaf + 150 mm.
CONFIGURATION
Two leaves, each up to 1 400 mm wide.
MECHANISM
Controlled operation. Grip on both sides.
Top guide: 60 mm high.
Contact